Stage lighting 4 points of attention

- Aug 03, 2019-

1. Half an hour before the opening, turn on all equipment, perform low temperature preheating, and test all equipment and wiring. The low temperature state means that the light is slightly bright.

2. After preheating for 15 minutes, reset all equipment to zero, let the device dissipate heat, and the heat dissipation time is no less than fifteen minutes.

3. After cooling, you can formally enter the stage of music performance.

4. After the performance is over and the guest leaves the venue, the lighting engineer should turn off all equipment and allow the equipment to dissipate heat for fifteen to twenty minutes, then seal or mask the equipment before the lighting engineer can leave.