Stage Lighting Design Instructions

- Aug 19, 2019-

The top light and location of the stage lighting position constitute a light array, and all parts of the stage have light-distributing points to eliminate dead zones, which can be combined flexibly and on demand.

1. Top light system design and configuration

The top light function is to illuminate the performance space in the depth of the stage. The various lamps used in the top light configuration greatly improve the light transmission of the light, and can be used for stage lighting or dyeing.

A. Configure the luminaire distribution as follows:

Over the stage, there are a total of 20 ceiling lights. Each of the top lights uses a different number of lamps.


B. The arrangement and projection method of the lamps:

The first top light and the surface light are connected to the lighting main performance area, pay attention to the height of the character when connecting, and can be used as the fixed point light and the special effect light in the first top light position, and select some lights to enhance the illumination of the fulcrum of the performance area; The road to the tenth can be cast directly to the stage, or it can be projected vertically downwards to enhance the lighting of the stage figures and the scene space. The front and rear rows of light are connected to each other to achieve a more uniform color and brightness in the stage performance area.


2. Computer light design and configuration

The computer lights are mainly arranged on the top light poles above the stage, and the projection angle, brightness, transformation pattern, beam size, color and other functions of the lamps can be arbitrarily adjusted to ensure that the performance requirements of the computer lights are met.


3. Light color changer design and configuration

The color changer installed on some of the lamps and lanterns plays a role in stage lighting, dyeing, color change, and setting off the plot to achieve a colorful effect.

1910(001)