Disco Equipment Controller 1024 Channels DMX 512 Computer Lighting Console

Disco Equipment Controller 1024 Channels DMX 512 Computer Lighting Console

Built-in15.6”touch screen, better for brightness and viewing angle.
Core I5 dual core processor, Intel 128G SSD, 4G (DDR3) notebook memory.
12 dmx output, 6144 channels.
Chat Now

Product Details

We investigate the production of Stage Lighting Mixer, Small Lighting Controller, Stage Lighting Desk, and take advantage of the strengths of many other manufacturers to innovate it continuously. We embrace the entrepreneurial spirit of gaining credibility through honesty and diligence in creating luster, and adhere the market and technology-driven operating model. Reliable good quality and very good credit standing are our principles, which will help us at a top-ranking position. Welcome to join us for business! In the future, our company will follow the business philosophy of "all for users, all from innovation".

Built-in15.6”touch screen, better for brightness and viewing angle.

Core I5 dual core processor, Intel 128G SSD, 4G (DDR3) notebook memory.

12 dmx output, 6144 channels.

Artnet Support, extend to 64 DMX output.

UPS power protector built-in, Still running for 30min when the power cut down, to make sure the system error and program lost.

Special design for start the controller without power.

Keyboard build-in

10 Marcos buttons, can edit any chase

20 playback fader, A\B partition can be paged for complex performanc

Expert Wing support, extend the preset faders, can running more chases meanwhile

1000 Virtual playback Supported

Shape generator built-in, synchronized the effert

Player time code built-in, can be very convenient to edit the light show

Powerful CMY palette function

Graffiti style handwriting naming function Support

Chinese Menu, also many kinds of Language support

Thousands of Peasonality built-in, library Maker software inside

Visualiser Built-in, Video support

MIDI time code Control

TitanNet Sessions on-line function.

Connecting DMX Lines Introduction

The console communicates with lighting fixtures using the DMX512 system. The console itself can output 12 universes of DMX (each 512 control channels), but by distributing the DMX processing over networked nodes using the TitanNet system up to 64 universes can be controlled.

The console has 4 physical DMX outputs for direct connection to fixtures and dimmers, and can also send DMX over Ethernet and wireless Ethernet systems to allow connection to remote DMX Ethernet nodes, media servers, and so on.

When you patch a dimmer or fixture you tell  the Tiger Touch which of the 12 (or 64 with TitanNet) DMX universes it is on. Each universe can be configured to come out of one or more of the standard DMX outputs on the back of the console, or over an Ethernet protocol (see section  14 on page  191.)

By default, DMX Lines 1-4 are connected to the four XLRs on the console.

The 5-pin XLR sockets on the console are wired like this:

Pin 1


Pin 2

Data -

Pin 3

Data +

Pin 4

Not used

Pin 5

Not used

Each DMX line should pass through all the fixtures to be connected on that line one after the other and have a DMX terminator fitted at the end (120 ohm resistor between pins 2 and 3). You should not split the DMX lines using passive splitters (Y-splits) as this can corrupt the data.

Connecting A Monitor

You can optionally connect a VGA computer monitor to the console. This gives you extra screen space for workspace windows which can be handy for showing Visualiser or other information windows.

The external monitor is disabled by default and will show a 'disabled' message. To enable, switch to System mode and select [Display Setup] then press [External Display Disconnected]. The option will change to [External Display Connected] and the display will be enabled.

If you need to change the monitor resolution or settings, touch 'Tools' at the very top of the screen and select 'Control Panel', then 'External Monitor', then select the option to match the resolution of your monitor.

There are more details about setting up an external monitor, including troubleshooting help, on page 212.

Other Connections

You can connect an external keyboard and mouse to the console if you don’t like the touch keyboard which pops up on the touch screen. If you are using an external non-touch monitor you will need to connect a mouse. You can connect either USB keyboard/mouse or use the green/purple PS/2 connectors on the rear of the console - if using PS/2 devices, plug the devices in before powering up the console.

The console provides MIDI connections which can be used to trigger playbacks or connect MIDI timecode to the console for timecode-controlled cue lists.

You can connect the console to a LAN (local area network) using the RJ45 socket on the rear. This allows you to operate many more universes of DMX using DMX network protocols.

A 3-pin XLR socket for a desk lamp is provided on the rear edge of the console. Suitable lamps are available from guoda. The lamps are 12 volt, wired from pins 1 (negative) and 2 (positive) of the XLR.

We hope that we will develop together with you in order to jointly improve the manufacturing Disco Equipment Controller 1024 Channels DMX 512 Computer Lighting Console and innovative technology level! Welcome all of the friends and customers to join us. Our enterprise insists on innovation to promote the sustainable advancement of organization, and make us become the domestic high-quality suppliers.
Hot Tags: professional lighting console, China, manufacturers, suppliers, wholesale, customized, pricelist, quotation, in stock, Mini Lighting Controller, LED Lighting Controller, Dimmer Lighting Controller, Midi Lighting Controller, Midi Intelligent Lighting Controller, Stage Sharpy Beam Lights


You Might Also Like