DMX 512 8 Channels Splitter With Isolate Function
1. There is 8 channels outputs and 2 channels input for signal amplifier.
2. There is 3 work modes .each modes have a led showing.
Work mode1, M1 LED light flash (1 input 8 output), input: Channels A output, the 8 channels behind.
Work mode 2, M2 led light flash (1nput 4output), input: Channels A send to A1 TO A4, Output: Channels B send B1 to B4 like 2pcs 4 channels signal amplifier.
Work mode 3: M3 led light flash (1 input 8 output). Input: Channels A, output: When channel A have signal, should be Channels A, if Channels A have no signal, will be Channels B.
Use the mode button to change the work mode.
3. The signal mode: Button”out mode” to power on or offer for the signal mode.
When the function is opened, the input signal corresponding to the output signal, keep the output received the last frama data in the corresponding input when no signal (with and without signal, corresponding to the output have been maintained with signal output)
When the function is closed, Input a signal corresponding to the output signal, no input signal corresponding to output no signal.
4. Each channels have led light to show if this channels have signal.
5. There is 2 buttons, each click to change the corresponding function, the currect working state records in the absence of key opearation after 20seconds, mode button in mode 1 to 3.
6. The switch of DMX output open and shut without input signal, output have no signal.